Description
Protective Silicone Grease (corrosion inhibitor) is chemically inert, non-corrosive, non-toxic, and has excellent thermal stability. Protective Silicone Grease is obtained by the convenient addition of silicone polymers. Used as a dielectric seal and in the protection of metal surfaces, it has excellent stability and resistance to time and has no dropping point.
It can operate without losing its main properties, at temperatures up to 250 ºC for short period supports temperatures up to 300 ºC.

Main applications
Specially formulated to meet the FIB standard that provides maximum efficiency in protection without environmental impact the Protective Silicone Grease can be manufactured into suitable consistency indexes in a wide range of applications, such as:

– Protection of metals in prestressed structures,
– Protection for other metal surfaces,
– Permanent corrosion protection in open areas.

Characteristics
– Consistency (NLGI): 1 and 2
– Penetration (1 / 10mm): 310-340 / 265-295
– Weight Loss: 1% (100 hours at 200 ° C)
– Continuous Working Temperature: – 40 to 250 ºC
– Maximum Working Temperature: 300 ºC ± 10 ºC
– Dropping Point: Above 308°C
– Oil separation 50 hs at 100ºC:< 1%
– Solubility in water: Insoluble

Download de FIB compliance Test Report

Transport and storage
It should be transported and stored in accordance with common practice with chemicals and / or lubricants. This product is not classified as dangerous for transport.

Packing
– Cardboard barrel 25Kg
– Drum 170kg

Handling and method of application
– Surfaces must be cleaned with hydrocarbon solvents such as kerosene hexane, isoparaffin and so on.
– Application with brush, spatula or pumping.
– The reapplication intervals must be determined according to the working conditions.

Contact us at: 
sales@implastec.com.br

Comments
The information and data contained in this bulletin correspond to our current knowledge collected by trained and reliable technical personnel. They should be taken as guidance and not as a guaranteed specification. In any case of use, the customer must test the performance counting on information that we can provide. Indications for use are not suggestions for infringing a patent or legislation. Since we have no control over use by third parties, our liability is limited to our product only.